Original Panel – Timber Feature Cladding

Make a bold and dramatic statement with Stack Panel Original Panel. This unique and resourceful product creates a distinctive finish that is truly striking. Made entirely from GreenTag Certified Western Red Cedar off cuts, in irregular sizes and composed into random patterns, Stack Panel Original Panel brings artistic style, credible sustainability and multidimensional appeal to any space. The result is innovative, contemporary and highly textured, provoking a great deal of admiration.


  • Modern, contemporary look
  • Adds warmth and style
  • Quick and easy installation
  • A great range of stains and colours
  • Outstanding acoustic properties
  • Exclusive, patented design
  • Made from recycled off cuts of environmentally friendly Western Red Cedar
  • Raw timber finish creates an organic feel

Ideal Applications

  • Commercial foyer’s
  • Retail Spaces
  • Cafés and Restaurants
  • Designer houses & apartments
  • Hotels and Resorts
  • Office fit outs
  • Auditorium acoustic linings
  • Feature Walls
  • Stair Wells
  • Alfresco Areas


Original Panel is not only available in raw Western Red Cedar but in a range of satin coat finishes.   Can’t see a colour you like?  You can purchase the raw panels and apply your own custom finish.

Technical Information




ORG PNL 750 x 170 x 40


750mm wide x 170mm high x 40mm thick (max)


Western Red Cedar


Original Panel is made primarily out of the off cuts of cedar produced in the general milling of cedar profiles. These are machined, sanded and glued together in various configurations. The timber thicknesses of the individual off cuts are 12mm, 18mm, 30mm and 40mm. Panels can be run either horizontally or vertically in ‘brick’ format.


Raw, Satin Clear Coat, Teak Stained, Walnut Stained, Black Japan Stained, White Wash

Panels per m2

8 panels per m2

Weight per m2

Approximately 9.2kg per m2

Recommended Fixing

Flexible Builders Adhesive (ie Bostik Ultraset SF) applied with a notched trowel on a clean substrate.


Out of weather application for all pre finished options. Raw finish can be used in outdoor areas subject to the use of a UV and weather tested adhesive.

Installation Guide

This guide outlines basic measures that must be taken to ensure a successful installation of Original Panel to internal walls, ceilings and out-of-weather applications including alfresco ceilings.

Getting Started

OP Install_Fotor

  1. The panels must be installed onto a clean, solid surface, e.g. brick, rendered brick, fibrous cement sheeting or plywood. It can also be installed onto gyprock, if it has been secured correctly.
  2. Adhesive must be applied to the back of each Panel with an 8mm notched trowel and then placed on the wall. Each panel when laid should be tapped into place so the adhesives take hold.
  3. If proceeding with a horizontal application, set the first layer of Panels with a level sitting on 5mm packers to allow for an expansion gap.
  4. Start to lay Panels in a staggered brick like form leaving a 8mm gap at the top of the wall for an expansion gap.


  • All Panels should be cut on a drop saw for timber and ripped down with a circular saw. External corners should be mitered using the same Panel to match or using the half in half system where the bottom half of the Panel gets cut out to form an external corner.
  • Internal corners can be made using a DAR 40 x 40 WRC length.  This can be sourced from a cedar timber merchant or from Stack Panel.
  • The glue that Stack Panel recommends is Bostik Ultraset SF. 1 litre of glue for every 1m2 is sufficient.
  • All safety equipment should be used including earmuffs, eye protection and a dust mask.


What quantities do you sell these in?

We sell by the square metre with 8 panels to the sq m. Once above 5 sq m we do sell by the half sq m (4 panels).

Do these come as pre assembled panels or tiles?

Yes they do. Each panel is 750mm wide x 170mm high with a maximum depth of 40mm.

Do you supply adhesive with the order?

We don’t supply adhesive as this is readily available from any hardware store.  Refer to our Installation Guide for recommendation of adhesive.